Personalized Badges Smackdown!

I’m going to show you the basics first thing you’re going to need is a cover button kit here is the button just right here like that and then here’s the back part of it the concept is to wrap a piece of fabric around this cover button then glue the personalized badges rail onto the back with some epoxy and I like to use e you will need.

personalized badges

The tool itself the button goes into here and then you push it with this and I’ll show you that in a minute and then also a template you need a piece of fabric that is larger than the actual button because you need to wrap it around the back to encase all of the raw edges with this type of template it has a circle in the middle so.

You can place your fabric just the way you want it like with this one I wanted the owl right in the center of course so when I cut it out I placed it all in this area and then traced around it another thing you’ll need is some sort of marking pen you can use either a pen nets in the sewing notions section that’s designed to disappear with time or with water or this particular project since you’re never going to see these edges anyway.

You can just use a regular ballpoint pen or marker and of course you need a scissors and then some e brand epoxy so let’s get started you can pretty much use any kind of fabric you want as long as it’s something that will look good in this little area so obviously a large print isn’t going to look very good you wanted something.

That’s got a smaller print like this so you can get pretty much any fabric as long as it’s not something overly stretchy or too thick it has to still fit into the covered button so this is just a regular piece of cotton broadcloth we’re quilting cotton you can get fabric pretty much anywhere online and then you’re chain stores.

Comments are Disabled